Safety Engineer/ JSA Manager
Columbus, OH
Full-Time Regular
Construction
Page 1 of 2
Job Description for Safety Engineer
This position report directly to a Project Manager
Client has a job opening for a full-time Safety Engineer primarily for Data Center/Hyperscale Construction. Other projects could include utilities, tunnels, water/wastewater plants, transportation/highway and vertical construction projects.
Client provides:
• Full health benefits (medical dental and vision)
• Cellphone reimbursement
• 401K Plan
• Vehicle allowance when applicable
PRIMARY FUNCTIONS
• Perform all functions with honesty and integrity.
• Educate project staff and trades personnel on EH&S programs, policies and procedures and provide training on safe work practices.
• Review subcontractor safety programs for completeness and compliance with ACS policies, regulation, and owner contractual requirements.
• Promote safe work practices and safe working conditions in accordance with all Federal, State, and Local regulations, and Owner/contractual requirements.
• Coordinate preconstruction meetings with Project Safety Manager and Superintendent
• Gather pre-task plans and Job Hazard Analyses for all project contractors based on contractual requirements.
• Conduct safety meetings and issue minutes of meetings as directed by the Project Safety Manager.
• Maintain a log of each subcontractor’s toolbox safety meetings held with their employees.
• Provide safety reports to Project Safety Manager as required.
• Conduct safety audits and recommend corrective action per Company policy and work with Project Safety Manager to issue reports of any violations or unsafe practices to subcontractors for immediate resolution.
• Understand the public health and safety requirements and be fully trained in the proper safety procedures.
• Assume additional responsibilities as directed.
PHYSICAL REQUIREMENTS
• Climb permanent and temporary stairs and ladders
• Stand for long periods of time
• Use of construction personnel hoist
• Navigate active construction sites consisting of uneven ground varying in height and consistency of material
• Use of vision, hands and fingers
• Speak, hear, stoop/bend crouch
• Lift/carry a minimum of 30 pounds
• Be able to wear standard PPE, i.e. hard hats, safety vest, work boots, safety glasses/goggles
WORK ENVIRONMENT
• Mud, gravel, rutted/uneven ground etc.
• Exposed to outdoor weather conditions
• Exposed to heavy machinery
• Loud noise
• Tripping hazards
• Environmental hazards
EDUCATION REQUIREMENTS
• Associate’s degree or greater in Safety is preferred
• 5 years of experience in construction
• High School diploma or GED required
QUALIFICATIONS
• Qualified candidate must have a valid driver's license and retain a clean motor vehicle report (MVR) for final consideration.
• Ability to identify known potential exposures and recommend corrective actions.
• Computer skills and familiarity with Microsoft Office Suite program.
• Demonstrates fundamental management, leadership, interpersonal and conflict resolution skills with the ability to communicate well, both verbally and in writing
• Knowledge of Construction processes
• Knowledge of OSHA and other applicable Safety Standards
• Previous experience as a safety professional is preferred, but not required.
• Must be able to apply effective management techniques to maximize project performance.
• Thorough understanding of industry practices, processes, standards, etc. and their impact on project activities is essential.
• Excellent organizational, communication and interpersonal (tact, diplomacy, influence, etc.) skills.
• Possess a personal vehicle for use during the day for transportation to and from and on or around a job site.
• Ability to read and understand plans and direction given in English language.
• Ability to write in English.
• Basic math and computer skills
Page 2 of 2
• Ability to create and or edit documents using Microsoft Office products such as Word or Excel
• Ability to create and or edit documents using Google products such as Google Sheets or Google Docs
• Ability to create and or edit Outlook and G-Mail emails with attachments
DESIRED CERTIFICATIONS
• Completion of Industrial Training International’s Lift Director & Critical Lift Planning Course
• OSHA 501 or OTI certified
• Safety Trained Supervisor Construction (STSC)
ACS will assist in obtaining certifications
CAPABILITIES
• Ability to build relationships with and influence other functional areas
• Strong interpersonal skills
• Ability to work in a fast-paced construction environment
• Highly developed verbal and written communication skills
• Organization and time management skills
• Problem-solving skills with ability to perform root cause analysis
• Proficient with Microsoft Office applications
• Proficient with Project Management Tools
• Exposure to Contractor payment processing requests
• Meet travel requirements for job assignments
•
This position is contingent on the successful completion of a background check and drug screening.
Job Description for Safety Engineer
This position report directly to a Project Manager
Client has a job opening for a full-time Safety Engineer primarily for Data Center/Hyperscale Construction. Other projects could include utilities, tunnels, water/wastewater plants, transportation/highway and vertical construction projects.
Client provides:
• Full health benefits (medical dental and vision)
• Cellphone reimbursement
• 401K Plan
• Vehicle allowance when applicable
PRIMARY FUNCTIONS
• Perform all functions with honesty and integrity.
• Educate project staff and trades personnel on EH&S programs, policies and procedures and provide training on safe work practices.
• Review subcontractor safety programs for completeness and compliance with ACS policies, regulation, and owner contractual requirements.
• Promote safe work practices and safe working conditions in accordance with all Federal, State, and Local regulations, and Owner/contractual requirements.
• Coordinate preconstruction meetings with Project Safety Manager and Superintendent
• Gather pre-task plans and Job Hazard Analyses for all project contractors based on contractual requirements.
• Conduct safety meetings and issue minutes of meetings as directed by the Project Safety Manager.
• Maintain a log of each subcontractor’s toolbox safety meetings held with their employees.
• Provide safety reports to Project Safety Manager as required.
• Conduct safety audits and recommend corrective action per Company policy and work with Project Safety Manager to issue reports of any violations or unsafe practices to subcontractors for immediate resolution.
• Understand the public health and safety requirements and be fully trained in the proper safety procedures.
• Assume additional responsibilities as directed.
PHYSICAL REQUIREMENTS
• Climb permanent and temporary stairs and ladders
• Stand for long periods of time
• Use of construction personnel hoist
• Navigate active construction sites consisting of uneven ground varying in height and consistency of material
• Use of vision, hands and fingers
• Speak, hear, stoop/bend crouch
• Lift/carry a minimum of 30 pounds
• Be able to wear standard PPE, i.e. hard hats, safety vest, work boots, safety glasses/goggles
WORK ENVIRONMENT
• Mud, gravel, rutted/uneven ground etc.
• Exposed to outdoor weather conditions
• Exposed to heavy machinery
• Loud noise
• Tripping hazards
• Environmental hazards
EDUCATION REQUIREMENTS
• Associate’s degree or greater in Safety is preferred
• 5 years of experience in construction
• High School diploma or GED required
QUALIFICATIONS
• Qualified candidate must have a valid driver's license and retain a clean motor vehicle report (MVR) for final consideration.
• Ability to identify known potential exposures and recommend corrective actions.
• Computer skills and familiarity with Microsoft Office Suite program.
• Demonstrates fundamental management, leadership, interpersonal and conflict resolution skills with the ability to communicate well, both verbally and in writing
• Knowledge of Construction processes
• Knowledge of OSHA and other applicable Safety Standards
• Previous experience as a safety professional is preferred, but not required.
• Must be able to apply effective management techniques to maximize project performance.
• Thorough understanding of industry practices, processes, standards, etc. and their impact on project activities is essential.
• Excellent organizational, communication and interpersonal (tact, diplomacy, influence, etc.) skills.
• Possess a personal vehicle for use during the day for transportation to and from and on or around a job site.
• Ability to read and understand plans and direction given in English language.
• Ability to write in English.
• Basic math and computer skills
Page 2 of 2
• Ability to create and or edit documents using Microsoft Office products such as Word or Excel
• Ability to create and or edit documents using Google products such as Google Sheets or Google Docs
• Ability to create and or edit Outlook and G-Mail emails with attachments
DESIRED CERTIFICATIONS
• Completion of Industrial Training International’s Lift Director & Critical Lift Planning Course
• OSHA 501 or OTI certified
• Safety Trained Supervisor Construction (STSC)
ACS will assist in obtaining certifications
CAPABILITIES
• Ability to build relationships with and influence other functional areas
• Strong interpersonal skills
• Ability to work in a fast-paced construction environment
• Highly developed verbal and written communication skills
• Organization and time management skills
• Problem-solving skills with ability to perform root cause analysis
• Proficient with Microsoft Office applications
• Proficient with Project Management Tools
• Exposure to Contractor payment processing requests
• Meet travel requirements for job assignments
•
This position is contingent on the successful completion of a background check and drug screening.