Metal Caster
Avon Lake OH
Full-Time Regular
Job Duties and Tasks for: Metal Pourer and Casters
1) Add metal to molds to compensate for shrinkage.
2) Collect samples, or signal workers to sample metal for analysis.
3) Examine molds to ensure they are clean, smooth, and properly coated.
4) Load specified amounts of metal and flux into furnaces or clay crucibles.
5) Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
6) Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
7) Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
8) Read temperature gauges and observe color changes; then adjust furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
9) Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
10) Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners; collect scrap for recycling.
11) Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
12) Assemble and embed cores in casting frames, using hand tools and equipment.
13) Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
14) Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.